Part Number Hot Search : 
562K000 58X25 N4740 N4740 AC128 AD767 ANALOG LH17AS15
Product Description
Full Text Search
 

To Download TEL10-2410WI Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  www.tracopower.com page 1 of 4 models the tel 10wi series is a range of isolated 10 watt converters which come in a ultra com - pact dip-16 metal package. the design purpose of these series was to miniaturized low power dc/dc converters to the maximum without sacrifng high effcency. the tel 10wi series sets the new standart for power density with 3.83 w/cm 3 . the tel 10wi series offer an ultra wide 4:1 input voltage range and feature a high ef - fciency of up to 86% which enables an operation temperature of up to +70c at full load and up to 88c with 50% load. the converters have an internal input flter to comply with conducted emission en 55032 / en 55022 class a. the tel 10wi series models are an economical solution for space critical and cost sensitive applications in instrumentation, it and industrial electronics. order code input voltage output voltage output current max. effciency typ. tel 10-2410wi 3.3 vdc 2700 ma 80 % tel 10-2411wi 5.1 vdc 2000 ma 83 % tel 10-2412wi 9 - 36 vdc 12 vdc 833 ma 87 % tel 10-2413wi (nominal 24 vdc) 15 vdc 666 ma 88 % tel 10-2415wi 24 vdc 416 ma 88 % tel 10-2422wi 12 vdc 416 ma 87 % tel 10-2423wi 15 vdc 333 ma 87 % tel 10-4810wi 3.3 vdc 2700 ma 80 % tel 10-4811wi 5.1 vdc 2000 ma 83 % tel 10-4812wi 18 - 75 vdc 12 vdc 833 ma 87 % tel 10-4813wi (nominal 48 vdc) 15 vdc 666 ma 88 % tel 10-4815wi 24 vdc 416 ma 88 % tel 10-4822wi 12 vdc 416 ma 87 % tel 10-4823wi 15 vdc 333 ma 87 % models ? most compact 10 watt converter in dip-16 metal casing ? highest power density of 3.83 w/cm 3 ? 6-side shielded metal case with insulated base plate ? ultra wide 4:1 input voltage range ? high effciency for low thermal loss ? operating temperature range of -40c to +88c ? built-in en 55032 class a flter ? current limitation and protection against short circuit ? 3 years product warranty ul 62368-1 ul 60950 -1 dc/dc converter tel 10wi series, 10 watt
www.tracopower.com page 2 of 4 input specifications input current at no load 24 vin models: 10 ma typ. 48 vin models: 7 ma typ. surge voltage (1 s max.) 24 vin models: 50 v max. 48 vin models: 100 v max. start up voltage 24 vin models: 9 v (or lower) 48 vin models: 18 v (or lower) under voltage shut down 24 vin models: 8 v typ. / 7 v min. 48 vin models: 16 v typ. / 15 v min. input filter internal pi type recommended input fuse 24 vin models: 2 a (slow blow type) 48 vin models: 1 a (slow blow type) conducted noise en 55032, fcc part 15 class a without external components class b with external components C application note for filter class b proposal www.tracopower.com/overview/t el10wi emc immunity en 55024 C esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a C radiated immunity en 61000-4-3, 20 v/m, perf. criteria a C fast transient / surge en 61000-4-4, 2 kv, perf. criteria a (with external components) en 61000-4-5, 2 kv perf. criteria a 24 vin models: pi-type: 2 pcs. 470uf/50v chemi-con ky series & 1 pcs. 10uh/2.2a/0.1ohm inductor: 732774100 48 vin models: 1 pcs. 470uf/100v chemi-con ky series C conducted immunity en 61000-4-6, 10 vrms, perf. criteria a C magnetic field immunity en 61000-4-8, 100 a/m, perf. criteria a output specifications voltage set accuracy 1 % max. regulation C input variation (vin min. to vin max.) 0.2 % typ. / 0.8 % max. C load variation (0 C 100 %) single output: 1 % max. dual output: 1 % max. (balanced load) C output voltage balance dual output: 1 % typ. / 2 % max. (balanced load) C cross regulation dual output: 5 % max. (asymmetrical load 25 % / 100 %) temperature coefficient 0.02 %/k max. ripple and noise (20 mhz bandwidth) 3.3 & 5.1 vout models: 60 mvp-p typ. / 75 mvp-p max. other output models: 80 mvp-p typ. / 100 mvp-p max. start up time (constant resistive load) 30 ms typ. / 60 ms max. transient response time (25% load step change) 500 s max. over current limitation 160 % typ. of iout max. 195 % max. of iout max. short circuit protection hiccup, automatic recovery capacitive load C single output 3.3 vout models: 2600 f max. 5.1 vout models: 1300 f max. 12 vout models: 560 f max. 15 vout models: 560 f max. 24 vout models: 200 f max. C dual output 12 vout models: 390 f max. (each output) 15 vout models: 200 f max. (each output) tel 10wi series, 10 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
www.tracopower.com page 3 of 4 general specifications temperature ranges C operating (natural convection: 20 lfm, 0.1 m/s) 3.3 & 5.1 vout models: C40c to +80c other output models: C40c to +88c C case temperature +105c max. C storage temperature C55c to +125c derating 3.3 & 5.1 vout models: 2.0 %/k above 55c other output models: 2.8 %/k above 70c humidity (non condensing) 95 % rel h max. isolation voltage C input to output (60 s) 1500 vdc C input to output (1 s) 1800 vdc C input/output to case 1000 vdc isolation resistance (input to output, at 500 vdc) 1 gohm min. isolation capacitance (input to output, at 1 vac / 100 khz) 1500 pf max. reliability, calculated mtbf (mil-hdbk-217f at +25c, ground benign) 2540000 h switching frequency 355 C 485 khz. (pulse width modulation) safety standards /approvals iec/en/ul 60950-1 iec/en/ul 62368-1 C certification documents www.tracopower.com/overview/t el10wi environmental compliance C reach www.tracopower.com/info/reach-declaration.pdf C rohs rohs directive 2011/65/eu physical specifications casing material aluminium alloy, black anodized coating potting material epoxy (ul 94v-0 rated) pin material tinned copper package weight 6.5 g (0.23 oz) soldering profile 260c / 10 s max. supporting documents: www.tracopower.com/overview/te l10wi tel 10wi series, 10 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
www .tracopowe r. com ? copyright 2018 traco electronic ag sp ec i?cati ons can be changed wi thout noti ce! page 4 of 4 outline dimensions pin single dual 1 Cvin (gnd) Cvin (gnd) 7 nc nc 8 nc common 9 +vout +vout 10 Cvout Cvout 16 +vin (vcc) +vin (vcc) pin-out dimensions in mm, () = inch tolerances: x.x 0.5 (0.02) x.xx 0.25 (0.01) pin diameter 0.5 0.05 (0.02 0.002) 17 8 16 10 9 bot tom vie w 10.16 (0.40) 13.7 (0.54) 23.8 (0.94) 15.24 (0.60) 8.0 (0.31) ? 0.5 (0.02) 2.54 (0.1) 3.0 (0.12) 3.8 (0.15) 1.77 (0.07) nc: not connected tel 10wi series, 10 watt rev. june 14, 2018


▲Up To Search▲   

 
Price & Availability of TEL10-2410WI

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X